THS4031 Gerber Files

David Escandon

Other Parts Discussed in Thread: THS4031EVM

Hello,

I would to use the recommended layout on the EVM. I can simply copy and paste the board file into my existing design and add the power pad recommendations from the datasheet.

Can you please provide the gerber/board files for the THS4031EVM. I need this right away.

-David

over 13 years ago

0 Carissa Sipp over 13 years ago

TI__Expert 3075 points

8154.THS4031.ZIP

Hi David,

See attached file for the Gerbers requested.

Carissa

0 David Escandon over 13 years ago in reply to Carissa Sipp

Expert 2175 points

Hi Carissa,

I cannot open the files. I receive the following error message (see attached). I'm using the Allegro Viewer from Cadence.

What is wrong? What software do you use to view the files?

-David

0 Carissa Sipp over 13 years ago in reply to David Escandon

TI__Expert 3075 points

Hi David,

I am not sure what is wrong here...i cannot read the error but these files are fairly old and we had to go back to the vendor for the original file.

There is a Gerb Tool Viewer that allows you to see the files.

I believe the error on your screen is the same I receive when opening with cadence. I believe it was copied over from PADS and is now in another format.

Carissa

0 David Escandon over 13 years ago in reply to Carissa Sipp

Expert 2175 points

Hi Carissa,

I downloaded Gerber Tool, but the file type was not recognized.

I still can't open the file. What do you recommend I do?

-David

0 Carissa Sipp over 13 years ago in reply to David Escandon

TI__Expert 3075 points

Hi David,

I am not sure I understand why I can open and you can’t…

What error message did you receive?

Do you have P-Cad or maybe Altium? This may allow you to pull the files back in…BUT you should have no issue opening each layer as I did and look at

these using a gerber tool viewer. Since the original board files are gone (created back in ’99) what we recommend is creating the layout by looking at the gerber files in the viewer

for placement.

Carissa

0 David Escandon over 13 years ago in reply to Carissa Sipp

Expert 2175 points

Hi Carissa,

No, I didn't receive an error, but the files could not be opened using the Gerber Tool.

What is the version you are using? I only have viwers for various PCB packages.

If you can send me the link to the viewer you use, then I can download it.

-David

0 Carissa Sipp over 13 years ago in reply to David Escandon

TI__Expert 3075 points

Hi David,

I am using GerbTool 13.0. I downloaded this internally. There seem to be a few view versions on the web.

Easy enough you can import each file, one at a time or easy enough, use the import wizard and get help import the files to view.

Carissa

0 David Escandon over 13 years ago in reply to Carissa Sipp

Expert 2175 points

Carissa,

I finally got it to work using an evaluation version that is good for 30 days. Once this license expires, I won't be able to view it.

I would suggest you convert this over to an Allegro file at some point.

Thanks for your help.

-David

Amplifiers

Amplifiers forum

THS4031 Gerber Files