• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 48 subscribers
  • Views 242 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

THS4551: THS4551 AC Coupled single ended input to differential output

Harsh Shirke
Prodigy 120 points
Part Number: THS4551
Other Parts Discussed in Thread: ADS5294

Tool/software:

Hello,

I want to convert a 450m swing single-ended signal 3.5Mhz to10Mhz to a output of 2Vpp differential signal using the THS4551 and then connect it to an in put of ADS5294 ADC.

Is it possible to achieve a full-scale range in the ADC by configuring it?

If possible, could you please confirm how it should be configured to achieve this?

which value should i set in gain resistor and in feedback resistor in this application ?

My Vocm is 950mV.

I'm Confused to set my VCC and VEE according to my requirement.

Below given simulation circuit can i get output as per my requirement if yes then which values should i set as per my requirement.

Thanks