INA237: what action will INA237 do when the shunt IN+ disconnector

? ?

Part Number: INA237

Tool/software:

resently,we encount a enginering issue,INA237 show 0W with a heavy loading system,we suspect that the shunt differential signal IN+ IN- layer change via disconnect in the board，later this has been confirmed，I want to kown the detail mechanism of IN237 when IN+=floating,and IN-=+Vin?

over 2 years ago

0 Louis L over 2 years ago

TI__Expert 8790 points

Thank you for the question and using the E2E forum.

An expert will respond to this thread when we return from our holiday weekend on Monday, 7/8.

Louis

+1 Mitch M over 2 years ago

TI__Mastermind 31175 points

Hello,

When only one of the two input pins is left floating, the potential of the floating pin will drift to the same potential as the other pin, so in this case IN+ and IN- would both be at +Vin, leaving you with a differential volage of 0V, which is why you are seeing 0W.

Regards,

Mitch

Amplifiers

Amplifiers forum

INA237: what action will INA237 do when the shunt IN+ disconnector