TLV9002-Q1: Compatibility vs. Rohm/MSOP-8 package

Yuto Kitamura

Part Number: TLV9002-Q1
Other Parts Discussed in Thread: OPA2377-Q1

Tool/software:

Dear team,

I would like to propose the pin-to-pin alternative vs. Rohm/ TLR2377YFVM-CTR (MSOP-8). Do we have any package which is drop-in with Rohm/MSOP-8?

DGK is same package size but pin width is completely different.

Thank you for your support.
Yuto Kitamura

5 months ago

0 Clemens Ladisch 5 months ago

Guru 284990 points

It should be possible to create a footprint that allows both MSOP-8 and DGK; even a standard footprint might work. (PW would be even wider.)

Looking at the electrical characteristics, the OPA2377-Q1 would be a better match.

0 Gerasimos Madalvanos 5 months ago in reply to Clemens Ladisch

TI__Mastermind 29076 points

Hello Yuto-san,

We currently do not have a true pin to pin with the same footprint as ROHM's MSOP package. However, Clemens is correct that a footprint can be created for both by making the landing pattern longer. Here are the two footprints laid on top of each other.

Best,
Jerry

Amplifiers

Amplifiers forum

TLV9002-Q1: Compatibility vs. Rohm/MSOP-8 package