• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 409 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV1704-SEP: PSpice import into ADS

Maksim Inozemtsev
Prodigy 20 points
Part Number: TLV1704-SEP
Other Parts Discussed in Thread: TL431, TINA-TI, TLV1704

Tool/software:

Hello,

I am trying to import a PSpice model of the device into ADS from Keysight, but the circuit behavior does not look proper.
May you please support me to fix or adjust PSpice model, or maybe I am doing wrong something else?

I was able to import other TI components into ADS, for example TL431. With other SEP DC/DC converter I also had problem in the past, ADS support had to fix the model for me.

This is simple simulation I want to perform to make sure the model was imported correctly:


I expect, that when IN- (Blue) exceeds IN+(Red), output should go to the ground (Pink), but it does not happen:

During simulation I am getting these warnings:

Thank you in advance, looking forward to using your space portfolio in our satellite.

Best Regards,

MAksim

  • 0
    TI__Genius 12025 points

    Hi Maksim,

    It's hard for me to support an issue with ADS as that simulator is not one that we support. The TLV1704 model was created the use of PSpice or TINA-TI in mind.

    I can give some tips on importing models in general:

    1. Make sure to select the correct file format (PSpice library file) when importing models.

    2. Make sure that each of the nodes of the top-level subckt correspond to the appropriate pin on the schematic symbol that you generate.

    I've recreated the circuit using TINA-TI, and it seems to be working correctly there:

    TLV1704-SIM.TSC