Tool/software:
On the THS7530 datasheet figure 2 shows a plot of gain error versus Vg+.
How much will that plot vary part to part.
In other words can a single lookup table that corrects for this error be sufficient?
Tool/software:
On the THS7530 datasheet figure 2 shows a plot of gain error versus Vg+.
How much will that plot vary part to part.
In other words can a single lookup table that corrects for this error be sufficient?
Hi Mark,
This spec is not one that is tested at final test when we are testing our units before we ship to customers so lot to lot variation for something like this is not known. For most specs such as this one that are not tested, we usually tell customers to expect +/-15% variation from device to device. This percent could very well be less, but we cannot give a definitive number for specs such as this one because it will vary lot to lot.
Best Regards,
Ignacio