Other Parts Discussed in Thread: TINA-TI
Tool/software:
Hi,
I actually want to give a staircase input to opa690 while I am simulating it in TINA TI.
I want to give the staircase input with 5ns width and 42mV height for 20 counts.
This is how my input would like.
Can you please suggest me how i could give this input in the simulation tool .
I have used the PWL waveform this way:
But in the waveform, I'm not able to see the exact 20 jumps as I want, and it seems to have more jumps than wanted. This is the waveform I'm getting:
Please help me to generate the exact staircase waveform for simulation.
Thank you
