INA241B-Q1: 500V/V Gain Option for INA241B-Q1

Thank you for your response.

 I understand that it is a typographical error on the web page.
 However, the ICs you suggested can only detect unidirectional current, correct?
 If there are any alternative current sense amplifiers that support bidirectional current sensing, I would greatly appreciate it if you could let me know.

Here is a list of automotive, bidirectional current-sense amplifiers with a gain of 500: ti.com/amplifier-circuit/current-sense/analog-output/products.html#773=500&1498=Automotive&2192=Bidirectional (The INA241B-Q1 entry is wrong.)

I do not know what characteristics you need. There is no solution for common-mode voltages above 40 V; the INA253-Q1 supports 80 V with an integrated shunt resistor.

Hello Meran and Clemens,

Thanks for pointing out the error.  I will request it get fixed on the web.  As for other devices I agree with Clemens.

Regards,

Javier