AMC1350: Spice model

Aswathy P N

Part Number: AMC1350
Other Parts Discussed in Thread: AMC3330

Tool/software:

Hi ,

I am attaching the input section of battery sensing circuit.

I needed to know whether the pin connections of AMC1350 are correct or not ? Whether it will work for battery reversal operation?

7 months ago

0 Alexander Smith 7 months ago

TI__Guru 55342 points

Hi Aswathy,

These connections look OK. R33 is not necessary since AMC1350 has negligible input bias current.

How is the 5V supply for VDD1 generated? This supply must be referenced to the same mid point of the resistor divider.

AMC3330 is an alternative device for voltage sensing with integrated DC/DC converter to simplify the design.

0 Aswathy P N 7 months ago in reply to Alexander Smith

Prodigy 20 points

Hi, I just want to confirm whether my connection is as per your remark? Please let me know if this is correct. 5V for VDD1 is from separate isolated power supply.

0 Alexander Smith 7 months ago in reply to Aswathy P N

TI__Guru 55342 points

Hi Aswathy,

I do not see anything that changed from the first picture other than the low side, that doesn't show connection to anything?

As I said in my previous post, the resistor in series with the negative input can be removed.

0 Aswathy P N 7 months ago in reply to Alexander Smith

Prodigy 20 points

Hi, I just needed to confirm this ground connection. This ground is the same ground as that of the 5V reference supply to VDD1.Is this okay ?

0 Alexander Smith 7 months ago in reply to Aswathy P N

TI__Guru 55342 points

Hi,

Yes this is correct.

Amplifiers

Amplifiers forum

AMC1350: Spice model