• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 141 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMC6482: LMC6482 PCN change causing impedance changes

IRIS LU
Prodigy 10 points

Part Number: LMC6482

Tool/software:

Hi Team,

Per the PCN# 20231114005.1, the LMC6482 has FBA, process and wafer diameter change. we recently received the new version device, the pin impedance is difference with the old version. will this affect the function？  

  • 0
    TI__Guru* 77501 points

    Hi IRIS, 

    IRIS LU said:
    we recently received the new version device, the pin impedance is difference with the old version.

    I am not sure how you determine the differences in the input impedances. If this is determined by DMM, then this method is not valid. The difference in input impedance measured by DMM can only indicate that the two op amps are different (e.g. different FAB process), not the functionality. 

    The new op amp's functionality is the equivalent to the old one and FAB. There may be some slight differences due to FAB change, but they should perform nearly identical in your application. 

    If you have an application circuit for the LMC6482, I can take a look and provide some comments about the circuit. 

    Best,

    Raymond