OPA2320: Shutdown pin current

Mark Guastaferro

Part Number: OPA2320

Tool/software:

What is the max input bias current on the Shutdown pin(s) across temp when the SHDN pin is pulled high? The data sheet only provides the typical current at 25C. (0.13 uA). This data is needed for a system stress analysis.

over 1 year ago

0 Ron Michallick over 1 year ago

TI__Guru**** 173126 points

Mark,

I have no specific data, but just using 10X or 1.3uA or even 100 X 13uA likely wouldn't affect the system in a meaningful way.

0 Mark Guastaferro over 1 year ago in reply to Ron Michallick

TI__Genius 11645 points

Thanks Ron,

The customer is trying to make sure they capture all the power dissipation and that power supplies have margin for worst case conditions for all components on the board.

If I told them that we assume the max current would be below 10x of the typical, (1.3uA), would that be a reasonable assumption?

0 Ron Michallick over 1 year ago in reply to Mark Guastaferro

TI__Guru**** 173126 points

Mark,

Very reasonable.

Amplifiers

Amplifiers forum

OPA2320: Shutdown pin current