INA790B: TINA-TI spice model for INA790B

Ludwin Anton

Prodigy 40 points

Part Number: INA790B
Other Parts Discussed in Thread: TINA-TI

Tool/software:

Hi,

Is there already a TINA-TI spice model for the INA790B?

Or can I use another spice model that fits to internal amplifier of the INA790B and add the shunt resistor externally?

Thanks, Ludwin

2 months ago

0 Guang Zhou 2 months ago

TI__Mastermind 34130 points

Hi Ludwin,

We don't have the TINA model yet. In the meantime, please use the INA241 models, paired with a 0.4mOhm shunt resistor. An ideal output buffer can be included if you need to configure it to gain >1.

Regards

Guang

0 Ludwin Anton 2 months ago in reply to Guang Zhou

Prodigy 40 points

Thank you for the quick reply,

my intention was to simulate the behaviour of the output (stability, overshoot, settling time) as a function of the capacitive load and compensation (R_iso, CF). Of course, this is not meaningful with an ideal buffer.

So I have to wait for the definitive INA790B simulation model. Do you have an indication when this will be available?

Thanks, Ludwin

0 Louis L 2 months ago in reply to Ludwin Anton

TI__Expert 5560 points

Ludwin,

Thanks for the question and using the E2E forum.

Due to the U.S. holiday on July 4, we are currently out of the office. Someone will reply when we return on Monday, July 7.

Thank you for your patience.

0 Guang Zhou 2 months ago in reply to Louis L

TI__Mastermind 34130 points

Hi Ludwin,

I understand. As far as time line is concerned, I don’t have a specific date, but it is probably some time out as the backlog is being worked on. Once released, it will be downloadable at https://www.ti.com/product/INA790B.

Regards

Guang

Amplifiers

Amplifiers forum

INA790B: TINA-TI spice model for INA790B