LMH13000RQEEVM: Need an Example layout for the Laser Driver LMH13000RQEEVM in Altium format

Tapan Pattnayak

Part Number: LMH13000RQEEVM

Tool/software:

Hello

TI folks, I am starting a Laser Driver design with the LMH13000EVM. My aim is to make a form factor compatible board with lens holder. Can you please share your example layout of the EVM.

Altium format will be preferred.

Best

Tapan

1 month ago

0 Shreenidhi Patil 1 month ago

TI__Expert 3996 points

Anant Sinha can you please help here.

@Tapan , can you help us understand your size limits of your board ( laser driver portion ) , peak current .

0 Anant Sinha 1 month ago in reply to Shreenidhi Patil

TI__Intellectual 2710 points

Tapan,

You can take a look at the board layout section of the LMH13000RQEEVM user guide (https://www.ti.com/lit/pdf/SLOU587)

Can you share the laser and lens holder part number or dimension, based on those we can suggest you layout example.

Regards

Anant

0 Tapan Pattnayak 1 month ago

Prodigy 60 points

Hi Shreenidhi the peak current would be 2A max.

The size of the board would be 2 inch in Diameter circular.

Amplifiers

Amplifiers forum

LMH13000RQEEVM: Need an Example layout for the Laser Driver LMH13000RQEEVM in Altium format