LP324: ESD rating

Hi Carrie,

Thank you for your reply.

The ESD is dropping too low.(2kV - > 350V)
Could you tell me why?
I know there was a process change, but I think it's dropping too much.

BR,
Kengo.

Hi Kengo,

I understand your concern, but the HBM is lower due to the inherent design structure of the LP324. As long as ESD safety standards are followed, there should be no ESD damage to the devices. One note I would add is that this device passed up to 1.5kV CDM.

Best,
Carrie

Hi Carrie,

Thank you for your reply.

Is the CDM not listed on the datasheet?
Looking only at the values, it appears weaker, so I can not approve the PCN.(I think other customers think the same.)

BR,
Kengo.

Hi Kengo,

I checked and it looks like the CDM is not listed in the datasheet. I will look into this and see if I can get the datasheet updated to reflect the CDM value.

Best,
Carrie

Hi Carrie,

Thank you for your reply.
I'll wait for your reply.

BR,
kengo.

Hi Carrie,

How about your progress?

BR,
Kengo.