• State TI Thinks Resolved
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 63 views
  • Users 0 members are here
Support feedback
Options
Options
Related

THS3095EVM: Where can I get CAD/STEP files

Matthieu Zwahlen
Prodigy 10 points
Part Number: THS3095EVM
Other Parts Discussed in Thread: THS3092EVM

Hello

I've been asked to open a discussion on 'E2E forum' to get help about STEP files.
Can you provide mechanical designs, ideally STEP files, for the following parts?

  • THS3095EVM  
  • THS3092EVM

Thanks for the help

  • 0
    TI__Mastermind 30170 points

    Hello Matthieu,

      Yes, E2E is where you can ask any questions about any off our devices. 

       Below is the attached STEP and Gerber files for the THS309xEVM and the Gerber files for the THS3092EVM. I could not locate the STEP file for the THS3092EVM.

    THS309xEVM.zip

    THS3092DDA.ZIP

    Thank you,
    Sima

  • 0 in reply to Sima Jalaleddine
    Prodigy 10 points

    Lovely, thanks a lot for sharing!

    Is there any way to contact TI and ask the team to create the STEP file for me? Or at least get a PDF with the mechanical dimensions?

    Thanks again for the help!Pray

  • 0 in reply to Matthieu Zwahlen
    TI__Mastermind 30170 points

    Hello Matthieu,

      No problem! Through this forum e2e, you can contact any team that is responsible for a set of devices. I am one of the apps engineer for our high speed amplifiers. 

       The THS309xEVM file contains Gerber files/mechanical information + the STEP File. Unfortunately, I could not locate the P-CAD files of the THS3092EVM, but linked earlier in THS3092DDA.zip are the Gerber files/mechanical information:

      The .DRL, .BRD, .FAB, and .pnp files contain the mechanical information of the board. These files can be opened using Cadence Allegro or Altium:

    Thank you,
    Sima