INA193A-EP: MSL Level

Gary SMITH

Prodigy 20 points

Part Number: INA193A-EP

We have parts that the reel has MSL 1 but Data Sheet show MSL 2. What is correct MSL level

2 days ago

0 Gary SMITH 2 days ago

Prodigy 20 points

We have all these versions on the AML and we are getting p/n INA193AIDBVR.

INA193AIDBVT
INA193AIDBVR
INA193AIDBVTG4
INA193AMDBVREP
INA193AMDBVREPG4
INA193AQDBVRQ1

0 Joe Vanacore 1 day ago in reply to Gary SMITH

TI__Mastermind 20750 points

Hello Gary,

Let me look into this and give you an update tomorrow.

Thank you for your patience,

Joe

0 Joe Vanacore 1 day ago in reply to Joe Vanacore

TI__Mastermind 20750 points

Hello Gary,

The MSL rating is confirmed to be Level-2-260C-1 YEAR for the INA193AMDBVREP.

Can you provide a picture of your reel in this thread for me?

Best Regards,

Joe

0 Gary SMITH 1 day ago in reply to Joe Vanacore

Prodigy 20 points

here is a picture of the labelscan_gsmith_2026-10-29-14-51-10.pdf

0 Paul Grohe 1 day ago in reply to Gary SMITH

TI__Guru 70986 points

Gary,

This is not an error.

This device can be assembled at several different assembly sites. The various assembly sites can have different MSL level certifications for the same package.

The CDAT site is MSL 1 and the TFME site is MSL 2.

The MSL level shown on the datasheet/web are the WORST CASE of the sites (MSL 2).

The label will show the MSL level at the time of assembly for that site.

The label is correct. But it is still possible to receive MSL 2 devices (and the label will be marked as so...).

Amplifiers

Amplifiers forum

INA193A-EP: MSL Level