• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 47 subscribers
  • Views 859 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Potentiostat

neuro11
Prodigy 110 points

Other Parts Discussed in Thread: LMP91200, LMP91000, LMP91000EVM

I want to develop a 2 electrode potentiostat for some chemical sensing(change in potential on electrode surface). which analog IC and/evaluation board should i  start with?? after checking the site lm91200 seems the one. any advice???

  • 0
    TI__Intellectual 2630 points

    Neuro11,

    Yes for a 2 electrode pH chemical sensing application it would be the LMP91200 and LMP91200EVAL board.

    But you mention "potentiostat" so if it is a 2 electrode potentiostat gas sensing application I recommend looking at the LMP91000 and the LMP91000EVM board. The datasheet describes how to connect the device in the 2-lead (galvanic cell) configuration.

  • 0 in reply to Jason Seitz
    Prodigy 110 points

    Hi,

    thanks for the reply. It seems i might need LPM91000 but without counter electrode. I will not be sensing gas rather some very small variations of surface charges.