Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 2915 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

wien bridge sine wave oscillator

Mathan Raj
Prodigy 60 points

Greetings. Im raj from malaysia. im a student. Im having trouble with wien bridge sine wave oscillator. I have upload my circuit and the simulation result using multisim software. i didnt get the sine wave.Could anybody help me please.Tq

  • 0
    TI__Guru**** 151836 points

    Mathan,

    This is general oscillator advise that you may already know.

    If the gain is less than one, the oscillations will die out
    If the gain is exactly one, the oscillator might not start.
    If the gain is greater than one, then the oscillation will distort.