XTR300EVM pin

Arisa Ardiawan

Other Parts Discussed in Thread: XTR300EVM, XTR300

Good day friend,
I bought XTR300EVM with oldest version, and I was confused because the evaluation board is different with in the datasheet. Please could someone help me to set the jumper, because there is no jumper on evaluation board.

over 12 years ago

0 Collin Wells over 12 years ago

TI__Guru 64895 points

Hello,

I've attached the User's Guide for the original (older) XTR300 EVM. While the EVM you have will allow you to test the functionality of the XTR300, the EVM was redesigned to address some of the ease-of-use issues that it seems like you're experiencing. If available you may consider acquiring the newer EVM for more convenient evaluation of the XTR300 product.

4846.User_Guide_sbou034.pdf

0 Arisa Ardiawan over 12 years ago in reply to Collin Wells

Prodigy 20 points

Thanks, I already designed like the User's Guide. I want to make bidirectional current source, but the current was always drop to zero. I don't any idea why the current is dropping. Do you any idea?

Amplifiers

Amplifiers forum

XTR300EVM pin