Ok to link to Burr-Brown Application bulletins from FAQ/website?

Stefan Langer

Dear TI-team,

I'm currently working on FAQ pages around low current amplifiers and applications thereof.

As we are using a lot of TI/Burr Brown devices it seems obvious to refer the readers to some of the very well done BB bulletins for further reading.

Therefore I would like to ask:

* how to correctly link to the BB documents (example: http://www.ti.com/lit/an/sboa035/sboa035.pdf)

* correct references are in place - any further requirements to linking those documents?

* is a written approval required?

Best regards, Stefan

over 11 years ago

0 Tim Green1 over 11 years ago

TI__Expert 6275 points

Stefan:

The link below is one for ALL Burr-Brown app notes. If you refer to a link to any Burr-Brown App note you should be okay as this is all public information and you are not copying and using the infomation but merely citing it as a reference.

e2e.ti.com/.../2573.burr-brown-application-notes.aspx

Also consider that most of the Burr-Brown App notes were written when most op amps were dual supply, +/-15V supplies. Many applications today are single supply. This provides new challenges and the topologies inside single supply op amps have also changed. I encourage you to look at the blogs in the link below that bring up challenges and solutions using mostly single supply op amps.

http://e2e.ti.com/blogs_/b/precisiondesignshub/default.aspx

Alos consider looking at the link below realtive to stability on single supply op amps and other good info:

http://e2e.ti.com/support/amplifiers/precision_amplifiers/w/design_notes/default.aspx

Amplifiers

Amplifiers forum

Ok to link to Burr-Brown Application bulletins from FAQ/website?