Error in opening TSC files

Navroop Singh47

Prodigy 30 points

Other Parts Discussed in Thread: OPA140, OPA277, TINA-TI

Hello ,

I am trying to open schematics for exercise in Vos and Ib ( 1110-L-VOS and Ib) and it gives me error.

Anyone else having the similar issue? If so, how to resolve this error.

Thanks.

-Navroop-

over 10 years ago

0 Art Kay over 10 years ago

TI__Mastermind 24858 points

Do you have the latest version of Tina Spice installed? Below is a link.

Art

0 Patrick Joyce16 over 10 years ago in reply to Art Kay

Prodigy 50 points

We are having the same problem, the version 9.3.50.40 SF-TI just downloaded, but we cannot open either "1130-L - Input and Output Limitations - OPA140" or "1130-L - Input and Output Limitations - OPA277". Attempting to open these files give an "FPGA_pinout.txt file not found" The canned examples run fine, just not the lab exercises.

0 Art Kay over 10 years ago

TI__Mastermind 24858 points

To all,

Sorry about the inconvenience. I’ll work with the web developers to check all the links. This may take a little time. For a short term solution, I attached a zip file with all the simulation files for precision labs. Thanks for the feedback.

4540.precision labs simulation files.zip

0 Pete%20Semig over 10 years ago in reply to Art Kay

TI__Mastermind 25825 points

Hello everyone,

The issue is that the Lab simulations were saved as TINA10 files, which are not compatible with TINA-TI. The simulation files in the zip file that Art uploaded should work in TINA-TI. TINA-TI compatible files for the Lab simulations have been sent to our web developers and will hopefully be 'live' soon. Thanks a lot for pointing out this issue!

0 Pete%20Semig over 10 years ago in reply to Pete%20Semig

TI__Mastermind 25825 points

Hello everyone,

The TINA-TI version of the Lab simulation files are now 'live'! Please let us know if you have any additional issues.

Amplifiers

Amplifiers forum

Error in opening TSC files