• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 770 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TINA bode plot

Jeff Wang25
Prodigy 200 points

Some occasions the bode plot X axis in frequency shows 1, 13, 167... 10G (HZ) instead of 1, 10.. 2G. even though I enter 2G as the end of frequency.  How do I fix this?

  • 0
    TI__Genius 12631 points
    Hi Jeff, Double click on the x-axis, and when the dialog box opens, check the box at the bottom that says "Round Axis Scale". This will give you rounded out numbers for the x-axis. Alternatively, keep that box unchecked and instead manually enter the range of numbers you desire in the "Lower Limit" and "Upper Limit" Box. You can also control the granularity of the x-axis by specifying the "number of Ticks".
    The above information also applies to the y-axis.-Samir