• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 883 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PGA309's EEPROM programmed flag TI was changed despite of OWD bit is set to 1

weiming zhang
Intellectual 270 points
Other Parts Discussed in Thread: XTR115, PGA309

Hello

    Our pressure sensor products are formed by PGA309 and XTR115.

Maybe because of field noise,we found that PGA309's EEPROM programmed flag  TI was changed despite of OWD bit is set to 1.so no output is from our pressure senor.

Could you give me some advices?

Thank you.

Best regards

Weiming

  • 0
    TI__Mastermind 27715 points

    Hello Weiming,

    Can you give the estimated percent of systems experiencing this issue? What kind of noise is present on the power supply lines?

    Even when OWD is set high, communication can still occur during a 33ms window at power-on. To prevent unwanted communication during this time, we recommend using an EMI/RFI filtering circuit like the one shown in the PGA309 User's Guide, Figure 4-21.

    Similar EMI/RFI protection may also be required on the SDA/SCL lines to the EEPROM.

    Best regards,

    Ian Williams
    Linear Applications Engineer
    Precision Analog - Op Amps

  • 0 in reply to Ian Williams
    Intellectual 270 points
    Hello Ian

    We try it as your suggestion.

    thank you.

    Best regards.

    Weiming