• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 47 subscribers
  • Views 597 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About S-parameter of LMC6482

Gk 110
Expert 2440 points
Other Parts Discussed in Thread: LMC6482

Hello　to whom it may concern,

Our customer would like to get S(Scattering)-parameter of LMC6482.
Can you send S-parameter to me?

If there is no S-parameter about LMC6482,could you please teach me that reason?

Best regards,

Application : wireless tranceiver

Manabu Ito

  • 0
    TI__Guru 55306 points

    Hello Manabu,

    The LMC6482 is a low power, 1MHz CMOS op-amp, normally used in low frequency, high impedance applications. It is not suitable for 50 ohm systems.

    S-Parameters are normally not taken on low power op-amps. Some high-speed (>500MHz) LMH and THS devices do have S-Parameters since they are designed for 50/75 ohm systems and are measured under very specific conditions.

    Regards,

  • 0 in reply to Paul Grohe
    Expert 2440 points

    Hello Paul-san

    Thanks for your quick responce!
    And thanks for the detailed explanation!

    I understood it.

    Best regards,

    Manabu Ito