• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 759 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Sallenkey filter using opa835

sebin philip
Intellectual 340 points

Other Parts Discussed in Thread: OPA835, TINA-TI

I am giving 3.3 V as supply (single supply) to opa835 (Sallenkey filter) . But output my circuit is saturating at 2.6V . As per the data sheet of opa835 output swing is at least upto 3.1V.