• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 640 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to use PGA309?

yao Tim
Intellectual 270 points

Other Parts Discussed in Thread: PGA309

hi,

i have one PGA309 EVM kit,but i can not start the software about PGA309 EVM, when i  start software one mistake come, that is "Check you hardware connect and re-boot the software",who konw how to solve it？ thank you

  • 0
    TI__Mastermind 27715 points

    Hello Tim,

    The EVM hardware must be connected to your computer with a USB cable and powered on when you start the software. If not, then you will get the hardware connection error.

    Best regards,

    Ian Williams
    Linear Applications Engineer
    Precision Analog - Op Amps