Other Parts Discussed in Thread: INA219,
Hi Sirs,
We found the INA219 EVM is not functional since the 9V AC adapter was removed from the box (application note released on 5/18/2016). With application note's suggested jump configuration as it shown on the picture below.
Same jumper setting as the application note, 9V power supply externally. However, the Vdut LED and INA219 EVM's Power indicators are dark, I2C pull up voltages and Vs power supply are near 0V.
We got error mesaage from the GUI:
Would you pls advise if there is something missing with this configutation?
Thank you and Best regards,
Wayne Chen
12/20/2016