• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 809 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH6401: LMH6401 / Anchor pins connection

S.Satoshi
Guru 21685 points
Part Number: LMH6401

Hi,

Please let me ask the anchor pins connection. Is it connected to GND potential or floated pattern? From reference layout in datasheet, it is not connected to GND on top layer.

Best Regards,

Sonoki / Japan Dsity

  • 0
    TI__Genius 15975 points

    Hi Sonoki,

    The anchor pins connections are normally floating. They are not connected to any internal circuit and are there to anchor the part in any mechanical stress related conditions.

    Best Regards,

    Rohit