• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 1218 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XTR115: 4-20mA isolation solution

Sheldon Cai
Intellectual 1290 points

Part Number: XTR115
Other Parts Discussed in Thread: ADS1220

Hi All,

   Do we have 4-20mA isolation solution /TI deisgn , the input is 4-20mA and output is 4-20mA, with isolation between input and output , can have a 24V power to this solution . 

Thanks!

  • 0
    TI__Mastermind 25075 points
    Hi Sheldon,

    are you looking for a complete analog signal chain?

    What is often implemented is a solution where you convert the 4-20mA signal to digital using an ADC (e.g. ADS1220), then transmit the data using a digital isolator or transformer over the isolation barrier and then convert the signal back to analog using a DAC or PWM+filter implementation. You would have to use an MCU then on one (or both) of the isolated sides.

    Regards,