OPA129: Can this device be acquired as an unpackaged die?

Eric Schultz

Part Number: OPA129
Other Parts Discussed in Thread: LMP7721, LMC6482, LMC6001, LMC6081

I am considering integrating a photodiode with a trans-impedance amplifier and was wondering if the OPA129 is available in die form?

over 8 years ago

0 Thomas Kuehl over 8 years ago

TI__Guru* 93105 points

Hi Eric,

Sorry we were slow getting back to you. The number of TI products available as die is limited. I found this webpage and it lists those that are available:

www.ti.com/.../overview.page

The OPA129 is not on the list but if your supply voltages are low the LMP7721, low femptoamp input bias current amplifier is available.

Regards, Thomas

Precision Amplifiers Applications Engineering

0 Paul Grohe over 8 years ago in reply to Thomas Kuehl

TI__Guru 61746 points

Hi Eric,

If 5V is too low and can go up to 15V supply, I would also recommend the LMC6001 (tested to 25fA) or LMC6081 (parent die of LMC6001 and still typically <20fA). Or the LMC6482 if you need R-R input (also typically <20fA).

0 Eric Schultz over 8 years ago in reply to Thomas Kuehl

Prodigy 20 points

Thanks Thomas. That is useful.

Best,

Eric

Amplifiers

Amplifiers forum

OPA129: Can this device be acquired as an unpackaged die?