• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 641 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH2832EVM-50: SPI control via Matlab using USB interface for EVB

Youngho Suh
Intellectual 490 points
Part Number: LMH2832EVM-50
Other Parts Discussed in Thread: LMH2832,

Hi,

I am trying to develop ATE software to control gain of LMH2832EVM-50 with Matlab. Since EVB has already USB interface, I would like to take advantage of the connection as it is. But if you know how to control with Matlab through USB or LMH2832 control GUI Software together with Matlab control, can you advise?

Thanks,

  • 0
    TI__Genius 15975 points
    Hi Youngho,

    I am sorry but we don't have LMH2832 control GUI software or source code through Matlab. Most of our software is written in Labview, and I think you should be able to get support for that. The LMH2832 USB interface is through FTDI device (FT245RL), and you might want to check with them as to whether there is a MATLAB code for controlling that device.

    Best Regards,
    Rohit