LMP93601EVM: LabView Code and Drivers

Richard Elmquist

Mastermind 45250 points

Part Number: LMP93601EVM
Other Parts Discussed in Thread: LMP93601

Can we supply either the LabView Code or the Labview drivers used in the LMP93601EVM?

I understand if they are supplied as is with no support.

Thanks for your help with this!

Richard Elmquist

over 7 years ago

0 Jose Arteaga4 over 7 years ago

TI__Expert 5695 points

Hi Richard,
The code and drivers of labview based GUI are normally not for sharing . The GUI that uses these elements is for evaluation purposes only.

What I recommend is look the following TI design to understand a good example of system implementation. The MCU FW is available for download so you will get a god idea on interfacing the LMP93601 device. Let me know if that helps.

www.ti.com/.../tida-00213

Regards,
Jose

0 Daniel Popa over 7 years ago in reply to Jose Arteaga4

Prodigy 10 points

Hi Jose
What drivers are needed to connect the LMP93601EVM to the CCS? What I get is a "No USB FET was found" message.
Thanks

0 Jose Arteaga4 over 7 years ago in reply to Daniel Popa

TI__Expert 5695 points

Daniel,

The I am not sure this EVM can be connected to CCS. It will depend if the MCU (MSP430 in this case) is supported. Please create a new thread in the MSP430 forum and use the right MSP430 PN in your post to be routed to the right support team.

Regards,
Jose

Amplifiers

Amplifiers forum

LMP93601EVM: LabView Code and Drivers