• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 464 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA226: Setting for only current sensing

David Park
Expert 7240 points

Part Number: INA226

Hi,

could you let me know setting for only current sensing?

MODE = 101

Is there any additional setting for only current sensing?

When use only current sensing, VBUS floating is ok?

Is there any addtional required h/w setting?

Thanks.

  • 0
    TI__Mastermind 26335 points
    Hello David,

    Thanks for reaching out on the forum. Why does your customer want to do that? They can do that. The device Bus Voltage register will just give garbage values. But for their use case, that does not matter. So no additional hardware should be required.