• State TI Thinks Resolved
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 1217 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TLV9061: RTM Schedule

TLV9061: Altium PCB CAD Files

Zebryk
Expert 1240 points

Part Number: TLV9061
Other Parts Discussed in Thread: OPA2333P, TLV9062, TLV7011, TPS22965

Hello,

I am searching for the Altium PCB footprints for the TLV9061 and TLC9062 for the X2SON and WSON packages?

Have these been completed yet?

If not, when?

Thanks,

--

Jay Zebryk

Zebryk Engineering

  • 0
    TI__Mastermind 30600 points
    Hi Jay,

    In general, you can find a CAD file and the footprint at the bottom of this page: www.ti.com/.../pinout-quality

    Normally, I would recommend going to this page (webench.ti.com/.../cad.cgi) for the Altium PCB footprints, but a search shows they're not up yet. Let me check with the team and see what the status is on those files.

    Thanks,
    Paul
  • 0 in reply to Paul Goedeke
    Expert 1240 points

    Paul,

    Likewise, I cannot locate a WSON footprint for the OPA2333P either.

    My reasoning was to continue product development, to use this larger package until the X2SON package symbol becomes available.

    BTW: Neither of these parts are yet included in Altium's Vault.

    Thanks,

    Jay Zebryk

  • 0 in reply to Zebryk
    TI__Mastermind 30600 points
    Hi Jay,

    While I work on getting the TLV9061 and TLV9062 figured out, I did find another device (TLV7011) that uses the DPW (X2SON) package that you could use for your layout - you may need to reassign some pins because the device is a comparator not an op-amp.
    webench.ti.com/.../cad.cgi

    Same story for the DSG (WSON) package, this part (TPS22965) is not an op-amp but you should be able to re-map the pins on the footprint for the time being:
    webench.ti.com/.../cad.cgi

    Apologies for the work around, I'll update once I know more regarding our devices.

    Thanks,
    Paul
  • 0 in reply to Paul Goedeke
    Expert 1240 points
    Paul,

    Any ETA of getting those symbols created?

    I will explore using Ultra Librarian to convert those Comparator designs.

    FYI: I found a OPA2213 which might work?

    To expand upon achieving my business objective quickly, perhaps we should try another tact?

    Wanted:

    1) A general purpose 2 Channel (Dual) Op-Amp
    2) The smallest package possible: (I can proceed with the WSON for now.)
    3) Has a vetted Altium component.

    Mostly I need to place something on our prototype PCB and we can select the optimum part later.

    Not 100% sure but isn't the WSON package still much smaller (2mm x 2mm) than any other?

    Thanks,

    Jay Zebryk
  • 0 in reply to Zebryk
    TI__Mastermind 30600 points
    Hi Jay,

    When you go look for TI parts, are you accessing a Vault with TI parts when you're in Altium? Or would you normally download a file from one of the links I shared with you?

    Thanks,
    Paul
  • 0 in reply to Paul Goedeke
    TI__Mastermind 30600 points
    Hi Jay,

    I reached out to you via email, we can take this conversation offline at this point. I will mark this question resolved and look into getting those footprints added to the product pages.

    Thank you,
    Paul