• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 414 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA200-Q1: about input bias current

Paul Kim
Intellectual 1430 points
Part Number: INA200-Q1

Hi team

INA200-Q1 D/S say Input bias current = Max 16uA at VIN- pin..

so total input bias current would be Max 32uA(= 16uA x 2) for two input pins ?

further, may I know total input bias current for  two input pins at Vs = 0V and common mode voltage = 20V ?

  • 0
    TI__Mastermind 23855 points

    Hello Paul,

    Thank you for your interest in our INA200-Q1. The input bias current in the datasheet corresponds to the average value for both inputs, so the max will be 32uA for Vs=Vcm=12V.
    For this device architecture, we expect the input bias current to basically be 0 for Vs=0V.