• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 49 subscribers
  • Views 826 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM358LV: Datasheet not output current

Vickers
Intellectual 980 points

Part Number: LM358LV
Other Parts Discussed in Thread: LM358B, , LM358

Dear all,

I don't find the output current in LM358LV/LM358B datasheet.Our customer concerns this parameter for their products.

LM358 is they used to before,the current driver capacity is ok:

  • 0
    Guru 140200 points
    Hi,

    have a look at figure 6 and figure 27 of datasheet.

    Kai
  • 0 in reply to kai klaas69
    TI__Genius 17440 points
    Hello,

    As Kai mentioned, figures 6 and 27 in the LM358 datasheet contain information about the output current for the LM358LV. Figure 6 displays the device's claw curves, showing the typical output current for given output voltages across various temperatures. Figure 27 displays the typical short circuit current across temperature.

    Note that these graphs only show typical values. This is a key difference between the LM358 and the LM358LV: the LM358 has minimum output currents and a maximum short circuit current specified in the electrical characteristic table, but the LM358 only gives typical values through the graphs.

    Best Regards,