HI SIR
I use the LM258 for 4-20mA current output,
but I find the two parts is diff perference(drift) in same circuit
Could you let me know which the diff of LM258DRG4 and LM258DR
thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI SIR
I use the LM258 for 4-20mA current output,
but I find the two parts is diff perference(drift) in same circuit
Could you let me know which the diff of LM258DRG4 and LM258DR
thanks
Alex,
That information can be found here.
http://www.ti.com/product/LM258/pinout-quality
The only potential difference listed is lead finish. The drift observed is not caused by the part number difference.
Is the drift a change 'over temperature' or change 'part to part'?
LM258A has better Vio spec and has a temperature drift maximum value in data sheet.