• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 429 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH6703: LMH6703 unity gain

Luca Toscano
Prodigy 80 points

Part Number: LMH6703

Hi,

can I use LMH6703 in non-nverting configuration with G=1?

thanks

  • 0
    TI__Genius 15605 points

    Hello Luca,

    Yes the LMH6703 can be set to unity gain. Because this part is a current feedback amplifier, however, there must always be a feedback resistor between the output and the inverting node. Section 8.3 of the datasheet shows the recommended resistor values to use.

    Best,

    Hasan Babiker