XTR111: About outputs of a board that use XTR111.

Y.Ottey

Mastermind 6145 points

Part Number: XTR111

Dear, all

Could you give some advice about the following content?

Our customer create a board that use XTR111.

This board is configured 2 same circuits, and XTR111 is used in each of circuits.

When our custom evaluated about each of circuits, it has been confirmed the difference about each of output signal. (Output data is the figure below)

Our customer would like to know the cause of this difference.

It would be great if you could let me know your thoughts this cause.

Yu Ohta

over 6 years ago

0 kai klaas69 over 6 years ago

Guru 140200 points

Hi Yu,

what exactly is the issue?

What does x-axis mean? Can you show a schematic?

Kai

0 Luis Chioye over 6 years ago in reply to kai klaas69

TI__Guru 55466 points

Hi Yu,

Can you please provide a complete schematic showing the circuit driving the XTR111 input, supply connections, as well as the RSET resistor and external P-MOS transistor and load circuits. Also, please provide an explanation of the issue and detailed description of the plots above.

Thank you,

Best Regards,

Luis

0 Y.Ottey over 6 years ago in reply to Luis Chioye

Mastermind 6145 points

Hi, Luis

Thank you for your reply.

I have the complete schematic and detail information.

However, these are included confidential business information.

So, I would like to exchange e-mails about this subject.

Could you please tell me your e-mail address?

I look forward to your reply.

Best Regards,

Yu Ohta

0 Luis Chioye over 6 years ago in reply to Y.Ottey

TI__Guru 55466 points

Hi Yu,

Sorry for the delay in the response. I will send you a direct email shortly so you can provide the schematic and we can review the circuit.

Many Thanks,

Kind Regards,

Luis

0 Luis Chioye over 6 years ago in reply to Luis Chioye

TI__Guru 55466 points

Hi Yu,

I will continue this discussion via email.

Best Regards,
Luis

Amplifiers

Amplifiers forum

XTR111: About outputs of a board that use XTR111.