MC3303: ESD rating

Vincent Chen64988

Other Parts Discussed in Thread: TLV4170, TLV4171, MC3303, LM324, LM224

Hi Team,

My customer need the information to get the device approval in their system, but cannot find ESD rating of MC3303DR in datasheet. Could team help to provide it?

Thanks a lot.

Vincent Chen

over 5 years ago

0 Paul Goedeke over 5 years ago

TI__Mastermind 30600 points

Hi Vincent,

If the ESD ratings are not in the datasheet, it is unlikely that we will be able to provide them at this point. Let me look into this and see if I can find anything out.

Does the customer have to use this device? Have them also look at the TLV4171 or TLV4170.

Best,
Paul

0 Paul Goedeke over 5 years ago in reply to Paul Goedeke

TI__Mastermind 30600 points

Hi Vincent,

I'm sorry but this is an old device and we no longer have this information in the database. If you need an ESD rating in the datasheet, I recommend selecting a new part like one of the devices I mentioned above.

Thanks,
Paul

0 Vincent Chen64988 over 5 years ago in reply to Paul Goedeke

TI__Expert 4480 points

Hi Paul,

Thanks a lot. Customer uses competitor's MC3303 and our solution will be a second source and already been qualified. Now customer is running ECN process and need this information. If ECN process is failed, our solution will not be able in customer's device pool.

Vincent Chen

0 kai klaas69 over 5 years ago in reply to Vincent Chen64988

Guru 140200 points

Hi Vincent,

the MC3303 is a dino under the OPAmp. The original MC3303 didn't contain any ESD protection. In the meantime some manufacturers of MC3303 have added ESD protection to the die. But I don't think that TI has done that, because TI has lots of newer and better OPAmp today.

Kai

0 Vincent Chen64988 over 5 years ago in reply to kai klaas69

TI__Expert 4480 points

Hi Kai,

Understood, thanks a lot for your advice.

Best regards,
Vincent Chen

0 Paul Grohe over 5 years ago in reply to Vincent Chen64988

TI__Mastermind 49876 points

Hi Vincent,

The MC3303 was originally Motorola's a second source of the LM324 (actually, LM224 if temp range matters). You can "upgrade" to the LM324 family which does have ESD ratings. Or pick something from this century... :^)

0 Vincent Chen64988 over 5 years ago in reply to Paul Grohe

TI__Expert 4480 points

Hi Paul,

Got it, I will discuss it internally. Then, we can ask customer if your proposal is workable for them.

Thanks a lot.
Vincent Chen

Amplifiers

Amplifiers forum

MC3303: ESD rating