DRV2700EVM-HV500: How to change to 1000V output

Shinichi Inoue

Guru 21721 points

Part Number: DRV2700EVM-HV500
Other Parts Discussed in Thread: DRV2700,

Dear Specialists,

My customer is considering DRV2700 and has a question.

I would be grateful if you could advise.

---

I am considering DRV2700 1000V output by using DRV2700EVM-HV500.

Could you please let me know how to change.

---

I appreciate your great help in advance.

Best regards,

Shinichi

over 6 years ago

0 Luis Fernando Rodriguez S. over 6 years ago

TI__Guru* 84915 points

Shinichi-san,

Unfortunately, the DRV2700EVM-HV500 is limited to a 500V output. In order to reach this value, the customer must place the switches SW3 and SW4 in high (or up) state. Due to the circuitry in the EVM, only 500V can be reached.

Best regards,
Luis Fernando Rodríguez S.

0 Shinichi Inoue over 6 years ago in reply to Luis Fernando Rodriguez S.

Guru 21721 points

Hi Luis,

Thank you for your reply.

I understand DRV2700EVM-HV500 is limited to 500V.

I'll share your suggesition with the customer.

I appreciate your great help.

Best regards,

Shinichi

Amplifiers

Amplifiers forum

DRV2700EVM-HV500: How to change to 1000V output