OPA2316: OPA2316SIRUGR datasheet PCB layout issue

Shu-Cheng LIN

Guru 11785 points

Part Number: OPA2316

Hi Sirs,

Sorry to bother you.

Refer to the datasheet.

The red mark below does not match the 0.58mm.

Could you please confirm & modify the SPEC, change the red mark to 0.575mm and re-update the specification.
[(1.85-0.7)/2]=0.575mm

over 5 years ago

0 kai klaas69 over 5 years ago

Guru 140200 points

Hi Shu-Cheng,

we are talking about an "error" of 0.005mm?

Kai

0 Paul Goedeke over 5 years ago in reply to kai klaas69

TI__Mastermind 30600 points

Hi Shu-Cheng,

The precision of the specifications given in the land pattern is 2 decimal places, which is why the number you point out is rounded. Does an error of 0.005mm impact your design? Most of the actual device dimensions have a tolerance of 0.1mm.

Thanks,
Paul

Amplifiers

Amplifiers forum

OPA2316: OPA2316SIRUGR datasheet PCB layout issue