LM193: Using +/- 12V as VCC and GND

chentsu chung

Part Number: LM193

Hi Team,

according to datasheet, Max. operation voltage is 30V, so I use +12V as Vcc and -12V as GND (+12V-(-12V)=24V) is available for LM193 or not?

Thank you,

C.T.

0 kai klaas69 over 7 years ago

Guru 140200 points

Hi Chentsu,

yes, will work.

Have also a look at the scheme in section 7.2 of datasheet to see what this means for the output.

Kai

0 Jonathan Nguyen over 7 years ago

Chentsu,

As Kai stated above, the LM193 will operate according to datasheet specifications at a Split 12V supply.

Regards,
Jonny

Amplifiers forum