Hi,
regarding the XTR300EVM, is the EVM adaptable for output level 0...10V and 0/4...20mA?
The DAC outputs (0...1.5V ) is provided by the MCU.
The EVM and the datasheets have the Rset sometimes at GND and sometimes at Vref.
Which Layout would you recommend?
Hi Frederik,
The XTR300 has a valid voltage output range of ±10V and a valid current output range of ±20mA (linear up to ±24mA).
It looks like you only need a unidirectional output, so I would recommend you set R_SET to ground. We give users the option to drive the XTR300 with a unidirectional input signal and get a bidirectional output several ways as shown in Figure 42 of the XTR300 datasheet:
Given your requirements, take a look at Figures 40 and 41 of the XTR300 datasheet for unidirectional voltage and current out configurations:
-Tamara
