• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 365 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA819: Simulation Model Mismatch

Franz Figueroa32
Intellectual 2660 points
Part Number: INA819

Hi E2E,

Good day!

Checking the simulation model of INA819, the pin is not matched with the pin numbering indicated on the datasheet. Would this have an effect on the simulation?

Thank you for your usual support.

Best Regards,

Franz