OPA192: About Test conditions

tsuyoshi tokumoto

Part Number: OPA192
Other Parts Discussed in Thread: OPA196

Hi team,

   I would like to know the test conditions at measuring the ts(setting time)
   listed on the data sheet page9.
   Is a load capacitance connected to the output?

Sincerely,
Tsuyoshi Tokumoto

over 6 years ago

0 Tamara M Alani over 6 years ago

TI__Genius 10850 points

Hello Tokumoto-san,

The test conditions are highlighted below:

-Tamara

0 tsuyoshi tokumoto over 6 years ago in reply to Tamara M Alani

Expert 2630 points

Hello Tamara-san,

Thank you for your prompt reply.
From your answer,I understand that OPA192 was measured with no load capacitance.

I asked you about it just to be sure, because some opamps(e.g. OPA196) were measured
with connecting a load capacitance.

Sincerely yours,
Tsuyoshi Tokumoto

Amplifiers

Amplifiers forum

OPA192: About Test conditions