• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 330 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PGA309EVM

Joseph Uthaman
Prodigy 30 points

Other Parts Discussed in Thread: PGA309, PGA309EVM-USB

I have PGA309EVM bought many years before. The EVM consists Sensor Interface board and PC interface board. I would like know how to use this DK with Windows10 based PC.

The CD came with the DK is not opening. Is there software available to use this PGA309EVM.

  • 0
    TI__Guru 55466 points

    Hi Joseph,

    The PGA309EVM-USB software is available for download on the PGA309 Evaluation Module landing page, along with the user guide and documentation.

    http://www.ti.com/tool/PGA309EVM-USB

    If you scroll down on this page, there is a link to download the PGA309EVM-USB software installer.  Please find the link below for the PGA309EVM-USB software Rev. C installer.

    http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sboc320&fileType=zip

    Please download the software installer zip file in your PC, un-zip the contents and run the setup.exe file, following the prompts on the installation.  Ensure to have Administrator privileges prior running the installation.

    Thank you and Best Regards,

    Luis

  • 0 in reply to Luis Chioye
    Prodigy 30 points

    Hi Luis

    Thanks for the prompt response. But my PGA309EVM development kit is having RJ45 connector to interface with PC. No USB interface.

    How to use this?

    Best regards

    Joseph

  • 0 in reply to Joseph Uthaman
    TI__Guru 55466 points

    Hi Joseph, 

    Unfortunately, the PGA309EVM was released 15 to 16 years ago and is now obsolete.  As you mention, it requires an old windows operative system (Windows XP), and requires RS232 interface.  You would need to find a PC that runs in this operative system supporting this interface, and follow the instructions on the user guide. The old software and hardware has many limitations compared to the new PGA309EVM-USB.

    We support the PGA309EVM-USB available on the web, the new USB version has been released since 2010. The PGA309EVM-USB is much improved from the original offering much more functionality on software and hardware.

    Thank you and Best Regards,

    Luis