Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 298 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA694: OPA694

Eric Shen42
Expert 2750 points
Part Number: OPA694

Dear TI team:

    My customer used OPA694 for signal amplification. The previous power supply is ±5V, the output is normal, and when they change power to +3.3V and -5V, the output level is lower than before, why is it happen?

   And if customer used +4V and -5V, can OPA694 output normal? 

   What data are required from customers? The customer is not very willing to provide some information, the input is changing, is pulse.

   Thanks!

Regards!

Eric Shen