Other Parts Discussed in Thread: OPA2376, TLV9062
If power stage working frequency around 500KHz, how to select right OPA for Current detect real-time ?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Yushu,
Please check out our cookbook circuits which includes various current sensing applications: https://www.ti.com/seclit/sl/slyy137a/slyy137a.pdf.
Here is the link to "Single-Supply, low-side Unidirectional Current Sensing" circuit: http://www.ti.com/lit/an/sboa285/sboa285.pdf.
You can use the following devices for your application: TLV9062, OPA2376. Please find the comparison table below:
Best Regards,
Bala Ravi
Hello Yushu,
Can really only answer in context of the intended circuit.
1. What is your sense resistor value
2. How much gain are thinking of (ADC full scale input range from max sense voltage)
3. harmonic content of interest
4. intended power supplies
5.unipolar or bipolar current sense