• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 48 subscribers
  • Views 422 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA2376: Unity Gain phase response

Blake Atkins
Prodigy 30 points

Part Number: OPA2376

How do I find the phase response of the OPA2376 for unity gain?

  • 0
    TI__Guru 74161 points

    In order to find the phase of the unity gain amplifier, you must first set up the circuit in such a way that it operates linearly - see below two setups for single and dual supply buffer.  Then you need to run AC transfer analysis as shown below.  Below I attached the circuit schematic for your convinience.

    Blake.TSC